You have no items in your shopping cart.

0

×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Please NOTE: updating firmware that is older than 1.9.6, please contact technical support for help before downloading the new firmware.

Installing the new firmware: Updating your firmware is a three-step process:

1. Find and download the correct image file to your computer.

2. From the Maestro web interface go to the device tab and click the update button under firmware.

3. Follow prompts to browse to and select the file you just downloaded.

Please NOTE: updating firmware that is older than 1.9.6, please contact technical support for help before downloading the new firmware.

HDbridge 2000 (current)

 

Revision 2.8.1, released Jan. 8, 2018

Release Notes

Various bug fixes including:

  • Update to 3d filtering on composite sources to fix known issue with color phasing on some SD content.
      • 2d setting now has improved video quality
      • 2d is new default setting, only applied with reset to defaults and new units with 2.8 as initial firmware
      • Existing configuration will not be overwritten with firmware update, but any systems set for 2d will get video improvements at update
  • Delay Audio Out not working on HDb2312
  • Maestro: Revert button remains on screen after a firmware upgrade
  • Maestro: Suppress channel errors on disabled channels
  • 2920i second IP Multicast stream did not traverse routers
  • Additional AVI register debug information 

Outstanding issues:

  • HDb2000/ZvPro Delayed Audio must be set via Maestro, front panel option does not save settings
  • EAS Relay will not work between HDB3000 and HDb2000/ZvPro

Please note: With the release of firmware 2.7 Chrome is the only formally supported browser for use with Maestro. We have found FireFox, Edge and Safari will continue to work, but often require the cache to be cleared when moving between older firmware and 2.7. Internet Explorer is no longer supported. If you have issues with Maestro loading properly, or fields not displaying, please try clearing cache or install and use Chrome

Revision 2.7.3, released Sept. 18, 2017

Release Notes

Various bug fixes including:

  • Maestro setting added for composite units which allows for 3D/2D filter change to work around issues with color phasing on some SD content
  • Inverted front display settings now “sticky” through restarts and firmware updates
  • PHP updated to revision 5.6.30

   Outstanding issues:

  • Revert button appears on all tabs in Maestro immediately after CM firmware update – clear browser cache removes it
  • Delayed Audio must be set via Maestro, front panel option does not save settings
  • Numbers in Device Name field do not sort properly, they are sorted in lexicographical, not numerical order
  • EAS Relay will not work between HDB3000 and HDb2000/ZvPro
  • HDb2312 only Delayed Audio out does not work

Please note: With the release of firmware 2.7 Chrome is the only formally supported browser for use with Maestro. We have found FireFox, Edge and Safari will continue to work, but often require the cache to be cleared when moving between older firmware and 2.7. Internet Explorer is no longer supported. If you have issues with Maestro loading properly, or fields not displaying, please try clearing cache or install and use Chrome

Revision 2.7.2, released August 3, 2017

Release Notes

Various bug fixes including:

  • Fix for Static IP address not immediately being available after update from 1.9.x
  • DVB composite units see pink bar or flashing video
  • DVB RF errors causing lower than expected power and MER

   Outstanding issues:

  • EAS Relay will not work between HDB3000 and HDb2000/ZvPro

Please note: With the release of firmware 2.7 Chrome is the only formally supported browser for use with Maestro. We have found FireFox, Edge and Safari will continue to work, but often require the cache to be cleared when moving between older firmware and 2.7. Internet Explorer is no longer supported. If you have issues with Maestro loading properly, or fields not displaying, please try clearing cache or install and use Chrome

Revision 2.7.0, released June 7, 2017

New Features:

  • Full integration in Maestro for HDb3000, HDb2000 and ZvPro units
  • Improvements in handling VGA 480 video input
  • Update the IP Stream TTL to 128

Various bug fixes including:

  • Updated the EAS-NET duration to be the duration of the audio
  • New FPGA to fix AC3 audio drop
  • ZVC File uploads affecting Port 4 audio on HDbridge2000 systems

   Outstanding issues:

  • EAS Relay will not work between HDB3000 and HDb2000/ZvPro

Please note: With the release of firmware 2.7 Chrome is the only formally supported browser for use with Maestro. We have found FireFox, Edge and Safari will continue to work, but often require the cache to be cleared when moving between older firmware and 2.7. Internet Explorer is no longer supported. If you have issues with Maestro loading properly, or fields not displaying, please try clearing cache or install and use Chrome

Revision 1.9.9, released October 26, 2016

      • Supported platforms: all HDb2000 and ZvPro units 
      • Fix for STB connection errors potentially causing video blinking
      • Updates for visual watermark for 480p resolutions 
      • Update for HDb2312 RF errors causing flashing pink video
      • Addition of beacon to IP streaming (IP units only) for auto-detection by the ZVMXE platform

Revision 1.9.8.30494, released July 19, 2016

      • Supported platforms: HDb2312 units
      • This release includes a fix for a timing issue that may cause the HDb2312 to become unresponsive when resetting to factory defaults via the Maestro management platform or the front panel display.

Revision 1.9.8, released May 10, 2016

      • Supported platforms: all HDb2500, HDb2600 and ZvPro units
      • This release adds a new feature to Maestro – User Access Control capabilities. Maestro now allows for administrators to create up to 10 user accounts with configurable access to ZvShow, ZvEAS, and Set-top Box control
      • In addition, preferred EDID is now configurable through Maestro and MP2 audio encoding is available on North American units

Revision 1.9.7, released February 10, 2016 (Updated March 26, 2016)

      • Supported platforms: all -NA and -EU HDb2000 Series products
      • VGA inputs can now be manually calibrated from the CLI
      • Corrects issue with internal routing table when changing from link-local to DHCP IP address
      • Corrects issue where ZvShow files were not being removed during a reboot to defaults
      • Font and background color of manual EAS messages was changed to allow for easier viewing
      • Allow lower base PID values, previous starting PID was 256, now lowest starting PID is 60
      • Corrects an upgrade issue on pre 1.9.6 systems with custom idle screens
      • Adjusted order of precedence when configuring HDMI preferred resolution

Revision 1.9.6, released August 25, 2015 (Updated Sept 22, 2015)

      • Supported platforms: all -NA and -EU HDb2000 Series products
      • Redesigned Maestro to separate RF and IP channel plans, AV source, and ZvShow configuration
      • Support for playback of ZvShow files from SD cards. Max size is now 4 GB when converted using the new ZvC
      • Custom watermark images now supported per program
      • Initial release for the HDb2920i

Revision 1.9.4, released April 9, 2015 (Updated May 12, 2015)

      • Supported platforms: all -NA and -EU HDb2000 Series products
      • Improved audio tracking resulting in reduced lip sync issues
      • VGA calibration can now be performed through the front panel display
      • Improved HDMI detection
      • Corrects issue which prevented ZvShow playing files without audio
      • Corrects audio drop issue when using low latency settings
      • Corrects issue that could result in periodic reboots

Revision 1.9.3, released January 19, 2015

      • Supported platforms: HDb2312-NA and -EU
      • HDb2312 products now support the new EAS capabilities and DIRECTV H25 receiver control introduced in release 1.9.2.
      • Per port adjustment of brightness, contrast, saturation, and hue now possible on SD units.

Revision 1.9.2, released October 15, 2014

      • Supported platforms: all -NA and -EU HDb2500, HDb2600, HDb2380, and HDb2840 Series products
      • Additional EAS capability with Monroe Electronics’ One-Net™ System via Monroe’s Stream MPEG 1/2 option.
      • Supported platforms can now display the new ZvShow channel allowing for a dedicated digital signage channel at no additional cost.
      • Through the new set top box control mechanism ZeeVee devices now have limited ability to monitor and control DIRECTV H25 receivers.
      • Initial product release for the HDb2920-NA and -EU (as of the January 5, 2015 update)

Revision 1.9.1, released June 6, 2014, 

      • Initial product release for the HDb2312-NA
      • Initial product release for the HDb2312-EU (as of November 17, 2014 update)

Revision 1.9.0, released May 6, 2014

      • Supported platforms: all -NA and -EU HDb2000 Series products
      • Improved video quality through improved rate-control mechanisms including better scene change tracking and edge quality, optimized selection of reference frame for bi-directional frames and implementation of field motion vectors for interlaced video with optimized selection of field or frame vectors.
      • Enables EAS Capability with Monroe Electronics’ One-Net™ System via Monroe’s unique EAS-Net™ protocol.

______________________________

HDbridge 2000 (older releases)

Revision 1.8.7, released February 13, 2014

      • Supported platforms: all -NA and -EU HDb2000 Series products
      • Adds the ability to invert the front panel display for ease of use in wall mounted applications
      • Addresses an RF issue with older HDbridge 2640, 2620, 2540, 2520, and 2380 Series Modulators

Revision 1.8.6, released January 29, 2014

      • Initial product release for the HDb2840
      • Supported platforms: all -NA and -EU HDb2000 Series products
      • Improvements:
        • Image quality for PAL resolutions
        • Improvements to HDMI link detection at startup

Revision 1.8.4, released December 30, 2013

      • Supported platforms: all -NA and -EU HDb2000 Series products
      • New Feature: DVB-T support for HDb2380-EU
      • Improvements:
        • Lip sync resolution
        • DVB-T signal quality improvements
        • Updated idle and test images for EU

Revision 1.8.3, released December 2, 2013

      • DVB-T tuning enhancements for HDbridge 2640, 2620, 2540 and 2520 HD Modulators
      • Correction for lip sync accrual

Revision 1.8.2, released November 20, 2013

      • Adjustment to v1.8.1, improving stability of all ZvPro and HDbridge 2000 Series Modulators

Revision 1.8.1, released October 17, 2013

      • All HDbridge 2500 and 2600 Series Modulators plus HDb2380-NA (QAM): Significant improvement to video quality through a unique implementation of mpeg-2 bidirectional -predictive frames (b-frames) and much better motion tracking.  The efficient implementation of b-frames still gets the benefits of reduced cumulative error (i.e. reduced video smudging) and smaller frame sizes. Smaller b-frames allow  the more important intra and  predicted frames to be larger, also improving the video. Finally, efficient b-frame encoding allows more time to track motion, allowing for another significant improvement in video quality
      • HDbridge 2500 and 2600 Series -EU products; includes DVB-T support

Revision 1.6.7, released August 15, 2013

      • Resolves intermittent audio cross over in HDb2380 units and reduces latency in UI and front panel display across all models

Revision 1.6.4, released July 25, 2013

      • New functionality:
        • All HDbridge 2000 Series products now support channel and RF power configuration via front-panel display
        • Custom idle screen can be applied per unit to replace ZeeVee logo
      • Updates & fixes:
        • Improved video quality
        • Improved audio sync (lip sync)

Revision 1.5.2, released May 20, 2013

      • Video quality enhancements for all HDbridge 2000 Series products
      • Support for VGA HD2500/2600 only (VGA DIN cable required)
      • Updates to Maestro web configuration/management tool and front panel display
      • PAL support for HDb2380-EU

Revision 1.4.3, released April 3, 2013

      • Video quality enhancements for all HDbridge 2000 Series products

Revision 1.3.0, released February 11, 2013

      • HDb2520/2540 initial production release

Revision 1.2.0, released January 8, 2013

      • HDb2380 video quality enhancements

Revision 1.1.2, released December 21, 2012

      • HDb2380 Bug fixes and performance improvements

Revision 1.1.0, released December 6, 2012

      • HDb2380 numerous audio and video quality improvements:
        • Spatial and temporal filtering of video
        • Audio lip sync improvements
        • Stability and usability improvements

Revision 1.0.1, released November 13, 2012

    • HDb2380 initial production release

 

Back to Top